NYRGY
Power cable 0,6/1 kV with Cu conductors, PVC insulated and sheathed
Application
Distribution and signal power cable for static application, mostly in ground, but also within and outside facilities, in cable canals, in concrete. Used in electric power plants and other electric plants, in industry, metropolitan networks and for connection of signalling devices in industry, traffic and similar. Resistant to mechanical loads, able to sustain heavier mechanical tensile strains, could be laid slantingly or vertically, same as on grounds exposed to land-sliding.
Construction
Conductors: Cu, class 2 according to EN 60228
Insulation: PVC compound DIV 4
Bedding: Extruded elastomere or plastomere compound or plastic tape
Armour: a layer of round galvanized steel wires with counter helix of galvanized steel tape
Sheath: PVC compound DMV 5
Technical characteristics
Test voltage: 4 kV
Rated voltage: 0,6/1 kV
Bending radius (min): single-core – 15D; multicore – 12D
Min. laying temperature: -5°C
Max. conductor temperature: 70°C
Max. short-circuit temperature: 160°C
Country: Austria, Germany, Poland
Industry: Building & Construction, Transmission, Distribution & Power Networks
Standard: HD 603 S1, IEC 60502-1
Type: Armoured Cable – SWA & AWA, Industrial Cable, Power Network & Local Distribution Cable